output n. 1.產量;生產,出產,產品。 2.【醫學】(糞便以外的)排泄物;排泄量。 3.【電學】發電力,輸出功率;供給量。 4.輸出信號。 monthly output 月產量。 the output of a factory 工廠產品。 the literary output of the year 當年文藝作品。 a sudden output of effort 奮發。
In the proposed method , the controller takes the buffer length as congestion indication , takes sources quality and bandwidth utility as object function so as to learn on line . as the controller outputs , the coding rate for input traffic sources and the corresponding user percentage are used to adjust the cells " arrival rate to the multiplexer buffer . compared with the previous method where cells " arrival rate is tuned only by the encoding rate and the encoding rates for all input traffic sources are regulated in a body , the proposed method guarantee that the quality of cells are optimal while cell loss rate is minimized , which means quality of service is guaranteed 在該方法中,擁塞控制器以緩沖區大小信元作為擁塞指示,以信源質量和帶寬利用率作為目標函數進行在線學習,控制器輸出包括信源編碼率及其對應的用戶數在全部用戶中所占的百分比,即根據信源編碼率及對應的用戶百分?jǐn)?shù)調整信源輸入流,從而克服了以往擁塞控制方法中僅僅調整編碼率帶來的對所有信源進行整體調整的缺陷,使控制系統在信元損失率最小情況下確保信源輸入流質量最高,從而有效地利用了網絡帶寬。
( 2 ) based on the research of predecessors , simulation research on fault detection methods of closed - loop control systems has been done . and what ’ s more , a novel method for fault detection of closed - loop control systems is presented , which combines the controller output error and the system output error ( 2 )在前人研究的基礎上,對閉環控制系統的故障檢測方法做了仿真研究,進而提出了一種閉環系統故障檢測的新方法:把控制器的輸出和系統的輸出結合起來檢測故障。
Based on continuous time system , convergence discussion and testifying were made to iterative learning control algorithm under the condition of constraints . then algorithm a and algorithm b that mentioned before are testified that they can be used under the conditions of that controller output has constraints 本文針對這一情況作了討論,基于連續時間系統,對控制器輸出有限制的情況下的迭代學習算法做了收斂性討論和證明,并且證明了前面提出的算法a和算法b可用于控制器輸出有限制情況下的機械手控制。
At the same time , this paper summarized the experience on solving the problem of amplitude limitation of the controller output and proposed a method to predict system output by use of the model prediction with feedback correction . the on - line intelligence switch of controller output between the limited amplitude and imc controller output is determined according to the state whether the system output and the predictive output are within the given error range 同時,本文在總結前人對輸入受限問題的處理經驗的前提下,提出用帶反饋校正的模型預測作系統輸出預測,根據系統響應和系統預測值是否在給定誤差范圍內來共同決定控制量在限幅值與內模控制器輸出值之間進行在線智能切換。
The apparatus includes a multimedia processor for performing a multimedia function when a controller is in a sleep mode wherein the controller is converted to an active mode when a specified key signal is input into the controller in the sleep mode and wherein the controller outputs an inactive signal to inactivate the multimedia processor 該裝置包括一個多媒體處理器,當控制器處于休眠模式時,該多媒體處理器可以執行多媒體功能,其中當某一特殊關鍵信號輸入到處于休眠模式的控制器時,該控制器可轉為激活狀態,并且其中所述控制器輸出一個去激活信號,去激活多媒體處理器。