The supervisory control and data acquisition system ( scada ) is a production course control and attemperment automatization system based on computer 數據采集與監控系統scada是以計算機為基礎的生產過程控制與調度自動化系統。
Standard test method for use in the evaluation of message communications between intelligent electronic devices in an integrated substation protection , control and data acquisition system 用于評價變電所保護控制和數據采集集成系統中智能電子設備之間信息通信的標準試驗方法
According to the characteristic of nine - area diagram of substation vol / var coordinated control , this system gives the defination of fuzzy sets and the degree of membership of input / output variables , and designs corresponding control rules . the results of simulation demonstrate the system can satisfy the constrains of the day - adjusting times of the switching of on - load transformer and paralleled compensation capacitors , and ensure voltage quality , reactive power basical balance . considering the var requirement in different load time period and the control demand in load saltation , a improved control scheme is provided . the results of simulation show the improved scheme can meet the demand of vol / var in different load time period , protect the wrong operation when either voltage or reactive power appears saltation , and decrease the times of regulation of the switching of on - load transformer and paralleled compensation capacitors finally , a background software module of substation vol / var coordinated control is designed , based on the supervisory control and data acquisition system of substation 仿真結果證明該系統能在各種負荷條件下確保電壓合格和無功基本平衡,且能滿足變電站對有載調壓變壓器分接頭日調節次數和并聯補償電容器組的日投切次數的限制。通過考慮不同負荷時段對無功功率的需求和負荷突變情況下的控制要求,對上述模糊控制策略進行了改進,仿真結果證明改進后的控制策略能滿足不同負荷時段對電壓和無功的要求、抑制電壓或無功突變情況下的誤動作,且有效地減少了有載調壓變壓器分接頭和并聯補償電容器組的調節次數。最后基于變電站scada系統設計了一后臺電壓無功綜合控制軟件模塊。