Uniaxial tension and cyclic deformation behavior of 16mn zn laminated aseismic composites 抗震復合材料的單向拉伸與循環變形行為
The quasi - superplasticity of as - cast lead brass was studied by monodirectional elongation experiment 摘要采用單向拉伸對鑄態鉛黃銅進行了準超塑性研究。
Abnormally turning of fine lath - like microstructures in low carbon microalloyed steel during mono - axis tension 低碳微合金鋼微細板條狀組織在單向拉伸中的反常轉動
The complex stress calculation formula , after starting of necking in simple tension experiment , is deduced in the paper 導出了單向拉伸試驗頸縮開始后復雜應力的計算公式。
In simple tension experiment , the stress - strain relationship submits hook ' s law within the limit of proportionality 摘要單向拉伸試驗中,在比例極限內,應力應變關系服從胡克定律。
Tests consist of three parts : material property test of panel , slippage coefficient test of bolt connection and cyclic load test of end - plate connections 試驗共分3部分:鋼板單向拉伸試驗;連接抗滑移系數試驗和端板連接循環加載試驗。
The microstructure was formed in the surface of the metal coating / polymer composites in the condition of monoaxial stretching and plane compression 摘要在單向拉伸和平面壓縮金屬涂層聚合物復合體系的條件下,在體系的表面形成周期性的微觀結構。
The fundamental solutions for an infinite plate with an elliptical inclusion under uniaxial tensile stress are given by using the muskhelishvili " complex potentials and progression method 運用muskhelishvili復勢理論,采用級數法得到了單向拉伸狀態下,含有橢圓夾雜的均勻無限大平板的基本解。
Firstly uniaxial tensile tests were carried out on dog bone specimen of the alloy . at 450 , it exhibits more than 300 % of elongation prior to fracture under const strain rate of 2 10 - 3s - 1 首先進行單向拉伸試驗并進行有限元模擬,得到在450 ,以2 10 - 3s - 1等應變速率變形,有超過300 %的最大延伸率。
Abstract : an approximate method has been used in this paper to calculate the stress concentration factor for a finite wide plate with a small circular hole under tension . the stress concentration factor has been obtaind analytically 文摘:采用一種近似方法,對含偏心小圓孔的有限寬板條在單向拉伸時孔邊的應力集中系數進行了求解,得出了解析表達式