Method of determining the crystallization temperatures of amorphous metals 非晶體金屬的結晶溫度測定方法
The traditional measuring method of melting and crystallizing temperature is complex and inefficient 摘要傳統的熔化溫度和結晶溫度測量方法復雜、效率低。
Plastics - differential scanning calorimetry - part 3 : determination of temperature and enthalpy of melting and crystallization 塑料差示掃描量熱法dsc第3部分:熔融和結晶溫度及熱焓的測定
A device of measuring the crystallization temperature of mold slag based on single thermocouple wire was introdued 筆者以保護渣結晶溫度為出發點,提出了一種將雙鉑銠熱電偶絲既作為加熱元件,又作測溫元件的熱絲法技術。
Dsc and x - ray diffraction results show that after pan - milling , the crystallinity and the size of micro crystals of pa6 decrease . melting point increases and crystallization temperature decreases 表現為結晶度降低,微晶尺寸減小;熔融溫度降低,結晶溫度升高;球晶尺寸減小。
In the isothermal crystallization experiment , the dsc exothermic curves become flat as decrease of the degrees of undercooling within the experimental temperatures 在等溫結晶實驗中,在所測試的結晶溫度范圍內,隨著過冷度的減小, dsc放熱曲線趨于變緩,結晶完成時間延長,結晶速率減小。
Nano - sio2 acted as the nucleation agent in pp , and greatly upgrading the crystal temperature , nucleation rate and crystallinity when 1 % ~ 5 % nano - sio2 by weight was added 在納米sio _ 2含量為1 5份時, pp的結晶溫度以及結晶速率隨著含量的增加而增加;結晶度隨著納米sio _ 2 ,粒子的含量先增加然后下降。
For pam 1 / nylon 6 with more rigidity composites , the rates of crystallization . during nonisothermal crystallization , the dsc crystallization curves and crystallization temperature tp move towards lower temperature 在非等溫結晶過程中,隨著降溫速率的增大, dsc結晶峰的位置和結晶溫度t _ p向低溫方向移動。
Automatic temperature coutrol can precisely control the crystalization temperature to ensure grain structure , mechanically controlled casting die speed is used to ensure the density of material 自動溫控系統對結晶溫度實施準確控制以確保晶粒結構(金相)符合要求。機械控制恒定的鑄造結晶速度以保證材質的致密性。
But it is mainly dependant on the physical parameters such as volume shrinkage . and when phbv crystallized , the hv content will be segregated , it will be accelerated when crystallization temperature is increased 在結晶過程中, phbv二元共晶中hv (羥基戊酸)組分會受到排斥,結晶溫度的升高會導致hv組分分凝現象的加劇。