Only moderate latax is feasible if the speed fall to m=1 or less . 如果速度降到M1或更小時,則只可能有中等的側向加速度。
Steering wheel step input or transient state yaw response test 極限側向加速度試驗
Only moderate latax is feasible if the speed fall to m = 1 or less 如果速度降到m 1或更小時,則只可能有中等的側向加速度。
Whereas , vdsc operates on physical limits of large vehicle slip angle and lateral acceleration , and enhances vehicle lateral stability by utilizing the additional yaw moment produced by different adhesion forces acted on the right and left side wheels 而vdsc系統主要在車輛大側向加速度、大側偏角的極限工況下工作,通常利用左、右兩側車輪附著力之差產生的橫擺力矩來達到穩定性控制目的。
Comparing and analyzing the experiment results , it is shown that : on the low adhesion road - control should be the primary as it can decrease the large side - slip angle ; on the high adhesion road - control is the best choice because it can restrain the oversized lateral acceleration ; on the mid - adhesion road , the right control strategy should be identified by the vehicle responses 對仿真結果的比較分析表明:在低附著路面上應以控制為主,以控制過大的質心側偏角;在高附著路面上應以控制為主,從而抑制較大的側向加速度;而在中等附著路面上,應根據實際車輛響應參數來決定到底應該采用何種控制策略。